Galvanizing Tags for Flat-Bar Grate Fabricators

InfoSight has created a special version of its KettleTag®Plus tag specifically to identify metal grates through galvanizing and installation. Now grate fabricators can have the efficiency and safety of barcoding and product tagging.

GrateTagTM is designed to be welded onto the grate prior to galvanizing. The special attachment process insures the surface behind the tag is exposed to the zinc bath. Tags stay attached after installation for permanent identification and traceability.

  • Error-proof tracking for grates
  • One tag for the entire process
  • Call for samples and test GrateTagTM in your process.



Download the GrateTagTM Brochure here. 

Technical specifications are subject to change without notice
GrateTag and We Barcode Difficult Stuff are trademarks of InfoSight
KettleTag is a registered trademark of InfoSight

GrateTag™ Specifications

Industry Metal grates and treads
Typical Customer Grate fabricators and galvanizers
Purpose Tracking work pieces through galvanizing, delivery and installation
Resistance Heat: 1000°F (538C) after removal of protective laminate
  Chemical: Tags legible after most caustic/acid rinses (10 minutes each and molten zinc bath)
  Abrasion: Moderate
  Ultraviolet: Highly resistant to sunlight and fading
Sizes Width: 3.0in (76mm)
Lengths: to customer specification, not less than 1.0 in (25mm)
Typical Lengths: 1.0 in (25mm)
Composition Metal with high contrast laser-markable coatings and specialty laminates
Available Forms Pre-printed by InfoSight or print on-site with one of InfoSight's durable, laser metal tag printers
Available Colors Standard white, colors by special order